WIP HELMET BEST PRACTICES:
HOW TO WEAR AND CARE
1. HOW TO MEASURE YOUR HEAD SIZE:
Measure your head circumference 25mm above your eyebrows.

Use our Head Measurer
in any WIP dealer shop!
2. POSITION ON THE HEAD:
Leave the space for two fingers between your eyes and the helmet bottom edge.

3. FIT SYSTEM ADJUSTEMENT:
Leave the space for two fingers between your eyes and the helmet bottom edge.
MICROMETRIC WHEEL
Dial the micrometric wheel to fit the helmet to your head size perfectly.
REAR STRAP
Adjust the rear strap lenght to fit the helmet to your head size perfectly.
4. STRAP DIVIDERS ADJUSTMENT:
All Wip helmets are equipped with Adjustable dividers with a small lever.

- Open divider lever
- Adjust divider height
- Close divider lever
Adjust both of your strap dividers
right below your ears.
5. CHINSTRAP ADJUSTEMENT:

CHINSTRAP LENGHT ADJUSTEMENT
ELASTIC LOOP
Move the elastic away from the buckle
Adjust strap lenght
Move the elastic back to its original position
OPTIMAL CHINSTRAP LENGHT

Leave the room for one finger between your chin and the chinstrap.
The chinstrap must touch your chin when opening the mouth.
6. MAINTENANCE

CLEANING
Cleaning the helmet shell should be done with lukewarm water and mild soap.
Do not use detergent. This also applies to the visor.
PADDING
The inner foam pads are removable and hand washable.
Use lukewarm water and solvent-free cleaning products.
STORAGE
Store your helmet at room temperature in well-ventilated areas.
Do not expose to direct sunlight. T < 50°C / 122°F
7. HIGH-VIZ STICKERS
Optimized stickers to place on your helmet to help you meet the mandatory minimum visibility standards for competition (300cm²) or simply for your own use, to be more visible on the water.
PROWIP 2.0
X-OVER
STICKERS
Do not stick on self-adhesive labels others than the ones recommended by the helmet manufacturer.
PAINTING
Do not expose the helmet to the action of chemically aggressive substances like paint or solvents.
8. YEARLY CONTROL
For schools and professionals, make sure to keep an up-to-date written record of all your PPE product purchased:
UP TO DATE WRITTEN RECORD
- Date of purchase and first use
- Model name & size
- Model reference and production code
- Tick the maintenance date box every year (on your document or on the product if it is a lifevest)
CHECKPOINTS
- Dent on the shell (must be less than 1.5mm and no cracks)
- Tearing on chinstraps
- Padding condition and good support in the helmet
- Buckle and fit system proper function
Please feel free to contact us if you have any question about the condition of your helmet, or if you need spare parts at:
9. RECOMMENDATIONS
We recommend to change your helmet every 5 years after date of purchase and first use (not the date of production). Of course, it really depends on how often you use your helmet, how much it’s exposed to UV, and its overall condition. A professional rider or a school may replace it every three years.